Page Comparison

Short:

1.We want to automate eden and eve integration testing on packet servers.

1.1 We are talking about servers: 

location: sjc1

c1.large.arm
c2.large.arm

location: dfw2

c1.large.arm.xda
baremetal_2a5

2. Problems

2.1 Adam/Eden/EVE side

2.1.1 EVE devices (not just on packet; anywhere) need to access their controller. If the controller is not on the same network or publicly accessible, they cannot access the controller.

2.1.2 EVE devices can only obtain an IP address from DHCP.

2.2 Equinix Metal (packet) side.

2.2.1 When creating a server with ipxe boot, the DHCP packet server only gives out the public ipv4 and ipv6 addresses (we cannot access to the packet local network automatically from eve - 2.1.2).

2.2.2 Servers are united into one physical local network in only one metro (New York, Dallas(ex location: dfw2) etc...).

2.2.3 Virtual Networks (VLANs) can work only in one metro (New York, Dallas etc...).

Solution:

1. We need to create Virtual Network(Vlan) in each metro that has servers for testing. (Justification 2.2.3)
   1. Each such network must have a server with a DHCP server. (Justification 2.2.3, 2.1.2, 2.2.1)
   2. For each such virtual network, a server with OpenVPN must be configured and clients must be accessible from this virtual network. (Justification 2.1.1, 2.2.3)

Step by step guid guide for setup network, dhcp, openvpn in each metro:

...