Page Comparison

...

1. On your computer, navigate in your terminal application to the location where you would like place EVE and Eden
2. Clone Eden's github
   

   git clone https://github.com/lf-edge/eden.git
cd eden

3. Build Eden
   

   make clean   <--This cleans up if you have already built something and does nothing if you haven't 
make build
./eden config add default --devmodel RPi4

4. Add * Add the xen flag if you want to use Xen as your hypervisor, ignore skip to step 5 if you want to use kvm


   ./eden config add second --devmodel RPi4
./eden config set default --key eve.hv --value=xen


5. Build the EVE image and start eden
   ./eden setup
./eden start

The output of 'setup' will produce the file 'live.img, which is the image file that you will put on the RPi's SD card

...